-
Introduction
The SIN-P260-M2 hydrostatic water level sensor is a device used to measure the level of water in a tank, reservoir, or other container. It works by detecting the pressure of the water column above it, which is directly proportional to the height of the water level. The sensor consists of a sealed pressure transducer that is installed at the bottom of the container, with a vent tube running up to the top.
As the water level rises, the pressure in the vent tube also increases, causing the transducer to output a corresponding signal. This signal can be used to display the current water level on a gauge, control a pump or valve to maintain a desired level, or transmit data to a remote monitoring system. Hydrostatic water level sensors are commonly used in applications such as water treatment, wastewater management, irrigation, and industrial process control.
-
Specification
| Product | Slurry level transmitter |
| Model | SIN-P260-M2 |
| Measuring range | 0m~0.5m···100m |
| Pressure overload | ≤2 times full range |
| Display resolution | 0.5% |
| Stability | ±0.2%FS/year |
| Output signal | 4mA-20mA |
| Pressure type | G(gape pressure) |
| Power supply | 12VDC-30VDC |
| Conpensation temperature | ≤2m:0℃~50℃ ≥2m:-10℃~60℃ |
| Medium temperature | -30℃~65℃ |
| Ingress protection | IP68 |
-
Features
-
Non-clogging and damage resistant to floating solids
-
Durable 316 SS construction for reliable, long life in harsh environments
-
1/2 inch NPT threaded connection, allows the unit to be installed in a pipe/conduit
-
The diaphragm is protected from physical damage and turbulence
-
Added weight helps hold the transmitter in place
-
Excellent chemical compatibility for wide application use
