Español
Русский 
Specification
| Parameters | ||
| Display | 2.8-inch monochrome LCD screen, resolution 128*64 | |
| Dimension | 100mm×100mm×150mm | |
| Hole size | 92.5mm×92.5mm | |
| Monitoring parameters | pH/ORP/Conductivity/DO/Turbidity/Sludge concentration | |
| Display range | pH：(0～14)pH | |
| ORP：(-2000～2000)mV | ||
| DO：(0～40)mg/L | ||
| Saturation：(0～200)% | ||
| Conductivity:(0～600)mS/cm | ||
| Turbidity:(0～4000)NTU | ||
| Sludge concentration:(0～120000)mg/L | ||
| Current output | (4～20)mA load capacity 500Ω, output accuracy ±0.2%FS | |
| RS485 output | Isolated, Modbus-RTU communication | |
| Alarm | 2 channels, capacity AC250V/3A | |
| Distribution output | 12V/125mA | |
| Relative humidity | (10 ~ 85)% (no condensation) | |
| Working temperature | (0 ~ 60)℃ | |
| Input | AC：(100～240)VAC | |
| DC：24VDC(Optional) | ||
| Storage conditions | Temperature:(-15 ~ 65)℃ | |
| Humidity(5 ~ 95)% (no condensation) | ||
| Height:<2000M | ||
Introduction
SIN-DC2000 Digital analyzer monitor is a general-purpose water quality controller. It is suitable for use with Supmea's multiple water quality series digital sensors. It is used to monitor water quality parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, sludge concentration, etc.
Advantages
Isolating transmitting output, with little interference.
Isolating RS485 communication.
EC/TDS measurement, temperature measurement,
top/bottom limit control, transmitting output, RS485 communication.
Configurable manual and auto temperature offset function.
Configurable upper/lower limit warning and delay.
Configurable hummer and LCD backlight switch.
Addition of universal password.
Industrial controlled door keep, to avoid instrument halted.
